KE3（IE3）系列高效三相异步电动机
类别：
参数
使用条件
• 环境温度：-15℃ ≤ θ ≤ 40℃
• 海拔：不超过 1000 米
• 额定电压：220/380V、230/400V、380/660V、400/690V
• 额定频率：50Hz或60Hz
• 接法：3kW 及以下规格为Y接法，4kW及以上规格为▲接法
• 工作方法：连续（S1）
• 绝缘等级：F级，绕组定子温升考核 80K
• 防护等级：机壳IP54、IP55，接线盒为IP55
• 冷却方式：IC411
IE3（能效等级3，GB3标准）效率限值（50Hz/60Hz）
| 50 Hz IE3 的额定效率限值（%） | 60 Hz IE3 的额定效率限值（%） | ||||||||
P N kW | 极数 / 同步转速 | P N kW | 极数 / 同步转速 | ||||||
| 2 / 3000 | 4 / 1500 | 6 / 1000 | 8 / 750 | 2 / 3600 | 4 / 1800 | 6 / 1200 | 8 / 900 | ||
| 0.12 | 60.8 | 64.8 | 57.7 | 50.7 | 0.12 | 62.0 | 66.0 | 64.0 | 59.5 |
| 0.18 | 65.9 | 69.9 | 63.9 | 58.7 | 0.18 | 65.6 | 69.5 | 67.5 | 64.0 |
| 0.20 | 67.2 | 71.1 | 65.4 | 60.6 | 0.25 | 69.5 | 73.4 | 71.4 | 68.0 |
| 0.25 | 69.7 | 73.5 | 68.6 | 64.1 | 0.37 | 73.4 | 78.2 | 75.3 | 72.0 |
| 0.37 | 73.8 | 77.3 | 73.5 | 69.3 | 0.55 | 76.8 | 81.1 | 81.7 | 74.0 |
| 0.40 | 74.6 | 78.0 | 74.4 | 70.1 | 0.75 | 77.0 | 83.5 | 82.5 | 75.5 |
| 0.55 | 77.8 | 80.8 | 77.2 | 73.0 | 1.1 | 84.0 | 86.5 | 87.5 | 78.5 |
| 0.75 | 80.7 | 82.5 | 78.9 | 75.0 | 1.5 | 85.5 | 86.5 | 88.5 | 84.0 |
| 1.1 | 82.7 | 84.1 | 81.0 | 77.7 | 2.2 | 86.5 | 89.5 | 89.5 | 85.5 |
| 1.5 | 84.2 | 85.3 | 82.5 | 79.7 | 3.7 | 88.5 | 89.5 | 89.5 | 86.5 |
| 2.2 | 85.9 | 86.7 | 84.3 | 81.9 | 5.5 | 89.5 | 91.7 | 91.0 | 86.5 |
| 3.0 | 87.1 | 87.7 | 85.6 | 83.5 | 7.5 | 90.2 | 91.7 | 91.0 | 89.5 |
| 4.0 | 88.1 | 88.6 | 86.8 | 84.8 | 11 | 91.0 | 92.4 | 91.7 | 89.5 |
| 5.5 | 89.2 | 89.6 | 88.0 | 86.2 | 15 | 91.0 | 93.0 | 91.7 | 90.2 |
| 7.5 | 90.1 | 90.0 | 89.1 | 87.3 | 18.5 | 91.7 | 93.6 | 93.0 | 90.2 |
| 11 | 91.2 | 91.0 | 90.3 | 88.6 | 22 | 91.7 | 93.6 | 93.0 | 91.7 |
| 15 | 91.9 | 91.4 | 91.2 | 89.6 | 30 | 92.4 | 94.1 | 94.1 | 91.7 |
| 18.5 | 92.4 | 92.6 | 91.7 | 90.1 | 37 | 93.0 | 94.5 | 94.1 | 92.4 |
| 22 | 92.7 | 93.0 | 92.2 | 90.6 | 45 | 93.6 | 95.0 | 94.5 | 92.4 |
| 30 | 93.3 | 93.6 | 92.9 | 91.3 | 55 | 93.6 | 95.4 | 94.5 | 93.6 |
| 37 | 93.7 | 94.2 | 93.3 | 91.8 | 75 | 94.1 | 95.4 | 95.0 | 93.6 |
| 45 | 94.0 | 94.2 | 93.7 | 92.2 | 90 | 95.0 | 95.4 | 95.0 | 94.1 |
| 55 | 94.3 | 94.6 | 94.1 | 92.5 | 110 | 95.0 | 95.8 | 95.8 | 94.1 |
| 75 | 94.7 | 95.0 | 94.6 | 93.1 | 150 | 95.4 | 96.2 | 95.8 | 94.5 |
| 90 | 95.0 | 95.2 | 94.9 | 93.4 | 185–1000 | 95.8 | 96.2 | 95.8 | 95.0 |
| 110 | 95.2 | 95.4 | 95.1 | 93.7 | |||||
| 132 | 95.4 | 95.6 | 95.4 | 94.0 | |||||
| 160 | 95.6 | 95.8 | 95.6 | 94.3 | |||||
| 200至1000 | 95.8 | 96.0 | 95.8 | 94.6 | |||||
机座和端盖材料 FRAMES AND END-SHIELDS MATERIAL
轴承规格 BEARING SIZE
| 机座号范围 | 极数 | 轴伸端 | 非轴伸端 | ||
| 铸铁壳 铝壳 | 铸铁壳 铝壳 | ||||
| 63 | 2,4 | — | 6201-C3 | — | 6201-C3 |
| 71 | 2、4、6、8 | — | 6202-C3 | — | 6202-C3 |
| 80 | 2、4、6、8 | 6204-C3 | 6204-C3 | 6204-C3 | 6204-C3 |
| 90 | 2、4、6、8 | 6205-C3 | 6205-C3 | 6205-C3 | 6205-C3 |
| 100 | 2、4、6、8 | 6206-C3 | 6206-C3 | 6206-C3 | 6206-C3 |
| 112 | 2、4、6、8 | 6206-C3 | 6306-C3 | 6206-C3 | 6306-C3 |
| 132 | 2、4、6、8 | 6208-C3 | 6308-C3 | 6208-C3 | 6308-C3 |
| 160 | 2、4、6、8 | 6309-C3 | 6309-C3 | 6309-C3 | 6309-C3 |
| 180 | 2、4、6、8 | 6311-C3 | — | 6211-C3 | — |
| 200 | 2、4、6、8 | 6312-C3 | — | 6212-C3 | — |
| 225 | 2、4、6、8 | 6313-C3 | — | 6312-C3 | — |
| 250 | 2、4、6、8 | 6314-C3 | — | 6313-C3 | — |
| 280 | 2 | 6314-C3 | — | 6314-C3 | — |
| 4、6、8 | 6317-C3 | 6314-C3 | |||
| 315 | 2 | 6317-C3 | — | 6317-C3 | — |
| 4、6、8、10 | 6319-C3 | 6317-C3 | |||
| 355 | 2 | 6319-C3 NU322 | — | 6319-C3 | — |
| 4、6、8、10 | 6322-C3 | ||||
接线盒出线孔 CABLE ENTRY
| 接线盒分档 | 电机规格 | 最大满载电流 | 出线孔尺寸 |
| 1 | H63-80 | 2.6 | 1xM20x1.5 |
| 2 | H90-100 | 6.8 | 1xM20x1.5 |
| 3 | H112-132 | 15.4 | 2xM25x1.5 |
| 4 | H160-180 | 42.5 | 2xM32x1.5 |
| 5 | H200-225 | 84.2 | 2xM40x1.5 |
| 6 | H250-280 | 166.6 | 2xM63x1.5 |
| 7 | H315 | 358 | 2xM63x1.5 |
| 8 | H355 | 546 | 2xM63x1.5 |
安装方式 MOUNTINGARRANGEMENT
参考标准 REFERENCE STANDARDS
电动机符合以下电气和机械标准:
Motor complies with the following electrical and mechanical standards:
| 名称 | IEC 标准 | 中国国际标准 |
旋转电动机定额和性能 Rotating electrical machines-Part l:Rating and performance | IEC 60034-1 | GB755 |
旋转电动机损耗与效率确定的标准测试方法 Rotating electrical machines-Part 2-l:Standaed methods for determining losses and efficiency from testsfexcluding machines for traction vehicles) | IEC 60034-2 | GB/T 1032 |
旋转电机整体结构的防护等级(IP 代码)分级 Rotating electrical machines-Part 5： Degrees of protection provided by the integral design of rotating electrical machines (IP code)-Classification | IEC 60034-5 | GB/T 4942.1 |
旋转电动机冷却方法 Rotating electrical machines-Part6： Methods of cooling (IC Code) | IEC 60034-6 | GB/T 1993 |
旋转电动机结构型式、安装型式及接线盒位置的分类(IM 代码) Rotating electrical machines-Part7： Classification of types of construction, mounting arrangements and terminal box position (IM Code) | IEC 60034-7 | GB/T 997 |
旋转电动机旋转电机线端标志与旋转方向 Rotating electrical machines-Part8： Terminal markings and direction of rotation | IEC 60034-8 | GB/T 1971 |
旋转电机噪声测定方法及限值 第9部分:噪声限值 Rotating electrical machines-Part9: Noise limits | IEC 60034-9 | GB 10069.3 |
轴中心高为 56mm 及以上电机的机械振动振动的测量、评定及限值 Rotating electrical machines-Partl4： Mechanical vibration of certain machines with shaft heights 56 mm and higher-Measurement, evaluation and limits of vibration severity | IEC 60034-14 | GB 10068 |
旋转电机尺寸和输出功率等级第1部分:机座号56~400和凸缘号55~1080 Rotating electrical machines-Partl： Frame numbers 56to 400 and flange numbers 55 to 1080 | IEC 60072-1 | GB/T 4772.1 |
中小型旋转电机安全要求 Safety requirments of samll and medium size rotating electrical machines | GB 14711 | |
旋转电动机温升 Electrical insulation-Thermal classification | IEC 60085 | GB/T 11021 |
电工电子产品自然环境条件 温度和湿度 Classification of environmental conditions Part 2-1： Environmental conditions appearing in nature-Temperature and humidity | IEC 60072-2-1 | GB/T 4797.1 |
标准电压 Standard voltages | IEC 60038 | GB/T 156 |
保护等级 PROTECTION CLASSES
IP | 5 | 5 | |
对固体材料的防护 Protection Against Solid Materials | 第一位数字 First Number | 第二重保护 Second Protection | 对液体材料的防护 Protection Against Liquid Materials |
无防护 Unprotected | 0 | 0 | 无防护 Unprotected |
防护大于 50 毫米的固体 Protection against objects greater than 50 mm | 1 | 1 | 防止垂直落下的水滴 Protection against water coming vertically |
防护大于 12 毫米的固体 Protection against objects greater than 12 mm | 2 | 2 | 防止与垂直线成 15°角范围内的滴水 Protectionagainst water coming vertically up to 15°angle |
防护大于 2.5 毫米的固体 Protection against objects greater than 2.5 mm | 3 | 3 | 防止与与垂直线成 60°角范围内的滴水 Protection against water coming vertically up to 60°angle |
防护大于 1 毫米的固体 Protection against objects greater than 1 mm | 4 | 4 | 防溅，任何方向的溅水 Protection against water splashing from all directions |
防止灰尘进入 Protection against dust | 5 | 5 | 防喷水，任何方向的喷水 Protection against water squirting from all directions |
尘密，能完全防止灰尘进入壳内 Complete protection against dust | 6 | 6 | 防强力喷水，任何方向的强力喷水 Protection against powerful water squirting from all directionsfrom all directions |
| 7 | 0.15m 至 1m 之间的临时浸水防护 Protection against temporary water submersion between 0.15m and 1m | ||
| 8 | 防止永久性浸水 Protection against permanent water submersion |
电机分解图 MOTOR EXPLODED VIEW
零部件清单 PARTS LIST
序号 No. | 名称 Description | 序号 No. | 名称 Description | 序号 No. | 名称 Description |
| 1 | B5 法兰 B5 Flange | 14 | 螺栓 Bolt | 27 | 接线板 Terminal Block |
| 2 | 接线盒密封圈 Terminal Seal | 15 | 铭牌 Nameplate | 28 | 螺丝 Screw |
| 3 | 前端盖 B3 Front endshield B3 | 16 | 轴承 Bearing | 29 | 接线盒座 Terminal Box Base |
| 4 | 机座 Frame | 17 | 后盖 End Cover | 30 | 垫片 Washer |
| 5 | 平键 Key | 18 | 弹簧垫图 Spring Washer | 31 | 螺丝 Screw |
| 6 | 密封圈 Seal | 19 | 螺栓 Bolt | 32 | 接线盒盖 Terminal Box Lid |
| 7 | 螺栓 Bolt | 20 | 密封圈 Seal | 33 | 螺丝 Screw |
| 8 | 弹簧垫圈 Spring Washer | 21 | 风叶 Fan | 34 | 垫图 Washer |
| 9 | 波形圈 Wave Washer | 22 | 风叶卡簧 Fan Clamp | 35 | 弹簧垫圈 Spring Washer |
| 10 | 轴承 Bearing | 23 | 螺丝 Screw | 36 | 吊环 Lifting Ring |
| 11 | 转子 Rotor | 24 | 风罩 Fan Cover | 37 | 接线盒出线螺套 Terminal Box Plug Screw |
| 12 | 定子 Stator | 25 | B14 法兰 Flange | ||
| 13 | 底脚 Feet | 26 | 螺丝 Screw |
规格
关键词：
发电机
相关产品
产品咨询
* 注意：请务必准确填写信息，确保沟通顺畅。我们将尽快与您联系。
-
-
扫一扫
关注我们